Special paint for Polystryrene surface

Инструкция

1 step. Surface Preparation

• For pitted surfaces, carefully sand and level using medium/course grit paper (400-600) to maximize smoothness and flatness.
• Remove any contamination with SCUDOPICKLING 100AB solvent cleaner, especially for metal surfaces.

2 step. Primer Application

• Apply TUTTOPRIMER IC100B (100%) + TUTTOCATALYST IC80 (80%) mix ratio 5:4 using an HLVP spray gun (or normal spray gun) with nozzles 1.2-1.3 mm at a nozzle pressure of 1.50 bar (217.5 psi).
• Shake well before use. Let it dry at 60°-70°C for 70 minutes, then allow it to rest for 30 minutes at ambient temperature (20-25°C) for 12-24 hours. Ensure drying in a clean, dust-free environment and avoid touching coated surfaces.

3 step. Chrome Application

• Shake well the 1K TUTTOCHROMAME STD TC20 before pouring it into the HLVP spray gun.
• Use nozzles sized 1-1.2/1.3 mm at a nozzle pressure of 1.50 bar.
• Apply three layers of TUTTOCHROME with crossed strokes until the surface is completely covered. Recommended spraying from bottom to top and then cross left to right.
• Let it dry at 60°-70°C for 70 minutes. For optimal results, attend at ambient temperature for 24 hours. The longer the solvents evaporate, the higher the reflectivity (up to 90%-95% spherical reflectivity).

4 step. Top Coat Step

• Apply CLEARTOP MT300 (100%) + CLEARCATALYST MT936 (40%) mix ratio 5:2 with an HLVP spray gun (or normal spray gun) with nozzles 1.2-1.3 mm at a nozzle pressure of 150 bar (2175 psi).
• If special coloring is required, add CME Pigments to CLEARTOP MT300 (100%) + CLEARCATALYST MT936 (40%) according to the specified mix ratio % for each CME Pigment on the bottle label.
• Let it dry at 60°-70°C for 1 hour or at room temperature for 12-24 hours. The product can be handled and packaged after 3 hours. Always apply a second layer of CLEARTOP MT300 (100%) + CLEARCATALYST MT936 (40%) after color coating for a high-quality, glossy, and durable finish.